Vertex Moulding Shinner

How-To Guide for Using Vertex Moulding Shinner:

Step 1: Surface Preparation:

1. Clean the Moulding: Ensure the moulding is clean and free of dust, dirt, and other debris. Use a mild cleaner and warm water to remove any residue.
2. Dry the Moulding: Allow the moulding to dry completely before applying the shinner.

Step 2: Application:

1. Shake Well: Shake the bottle of Vertex Moulding Shinner well before use to ensure even distribution of the polish.
2. Apply Thinly: Apply a thin, even coat of shinner to the moulding using a clean cloth or applicator. Avoid over-applying.
3. Spread Evenly: Spread the shinner evenly over the entire surface of the moulding.
4. Allow to Dry: Allow the shinner to dry completely according to the instructions on the product label. Drying times may vary depending on temperature and humidity.

Step 3: Buffing (Optional):

1. Buff the Moulding: Once the shinner is dry, buff the moulding with a clean cloth or buffing pad to enhance the shine.

Maintenance:

• For regular maintenance, dust or vacuum the moulding regularly.
• Periodically clean the moulding with a mild cleaner and warm water.
• Reapply the shinner as needed to maintain the shine and protection.

Safety Precautions:

• Wear appropriate protective gear, such as gloves, when applying the shinner.
• Ensure adequate ventilation during application.
• Keep the product out of reach of children and pets.
• In case of contact with eyes, rinse thoroughly with water and seek medical attention.
• If ingested, seek medical attention immediately.

Tips:

• Test the shinner on an inconspicuous area first to ensure you achieve the desired results.
• For best results, apply the shinner in a well-ventilated area on a warm, dry day.
• Avoid using abrasive cleaners or harsh chemicals on the polished moulding.
• To remove stubborn stains, consult with a professional cleaning service.

Remember: This guide provides general instructions. Always refer to the product label for specific instructions, safety information, and technical data sheet for complete details.

Disclaimer: This information is provided for general guidance only and should not be considered professional advice. The user assumes all risks and liabilities associated with the use of this product.